Did you know that the thermostat was invented in 1885? This was the beginning of temperature monitoring.
This system has evolved since then. Today, there are many different remote temperature monitoring system options.
Remote systems are much better than old-fashioned manual systems. But why? What are the benefits of remote temperature monitoring systems?
Keep reading and learn more about them below.
1. Reduce the Risk of Human Error
The global temperature monitoring system market was worth $1.66 billion in 2020. It has grown since then and this highlights its popularity.
Old-fashioned temperature monitoring solutions are prone to human error. This is because people will make mistakes no matter how careful they are. You may make a mistake when taking the temperature information.
You may change the temperature to the wrong setting. You might forget to check the temperature at the right time. All of these issues can ruin what you’re trying to refrigerate.
Suppose you must keep important medications in the fridge at a specific temperature. If the temperature gets too warm or too cold, the medication will get ruined. It would then be necessary to throw away that medication and buy replacements.
This is a big waste of money. It could also hurt those who need to have the mediation ready and available. This is also important for bacterial samples, food products, and so on.
You can reduce the risk of human error with a remote temperature monitor.
This makes it easy to keep up with what you’re trying to refrigerate. If the temperature is starting to waver, you can fix it before it becomes a problem.
2. More Analytics and Reports
Old-fashioned temperature monitoring solutions don’t have very advanced analytics or reports. They might tell you the most basic information necessary to keep the systems running. But this won’t help you with minute details and small adjustments.
But remote temperature monitoring can fix this problem. A remote monitoring system is designed to be comprehensive and full of important information. You can keep track of the temperature and look back on how it shifts.
You can also review the reports and make sure everything is in line with the necessary protocols. These remote systems also keep all this information in one place and make it accessible.
This makes it easy for you to look it over and do your job properly. Reviewing the analytics can also help you determine what can be done better in the future. This ensures that the monitoring system is used to its maximum potential.
3. Save Time
You may waste a lot of time with a temperature monitoring system that isn’t remote. Such a system would require someone to always be around to make adjustments. You may not know that the system needs adjustments if you don’t have a remote monitor to alert you.
This could ruin whatever you have in the fridge. Being around the fridge all day is not a viable option. It is also a big waste of time.
No one wants to wait around to make small temperature adjustments when they could be doing more important things. It would also make it more difficult to monitor the temperature while you’re out and about. But you won’t have these problems with remote monitors.
A remote monitor will tell you if the temperature has changed. You can then use the remote system to fix it without having to run over to the fridge.
4. Save Money
If anything goes wrong with what you’re keeping refrigerated, you could lose a lot of money. Suppose you have several important bacterial samples that you’re studying. They need to be kept at a cool and consistent temperature or their growth will be ruined.
If you’re not paying attention, a traditional temperature monitor could shift and become a few degrees warmer. This would ruin the samples and may require you to throw them out. You would then need to start from scratch with new samples.
This is a huge waste of time and money. This is also true for expensive medications that need to be kept at a constant temperature. No one wants to accidentally ruin such expensive products.
You can avoid this problem with a remote temperature monitoring system. You can check periodically to make sure that the temperature remains stable. You can also make adjustments when necessary.
5. Save Energy
Taking care of a traditional monitoring system takes a lot of energy. You will need to be on constant alert in case the system’s temperature shifts. This may require you to run back and forth between the fridge and another task.
This is not only a waste of time but a waste of energy too. You could use that energy to do more important things. But a traditional temperature monitoring system will always have you waste your energy.
This is because it isn’t efficient enough. But it’s different when you invest in a remote monitoring system. The system will alert you if anything is wrong with the temperature.
This ensures that you won’t have to check as often or waste as much energy changing the temperature. This makes your life and job much easier as well.
6. Monitor Other Factors Besides Temperature
Most remote temperature monitoring systems monitor more than temperature alone. Most of them also measure the humidity and CO2 levels inside the fridge. These factors are also important when keeping products safe and high quality.
A shift in humidity could ruin your samples. Very high CO2 levels could also do this. Remote monitoring systems may also keep track of the lights, power outages, and water leaks.
The monitoring system will alert you if anything abnormal is detected inside the fridge. This ensures that your samples or products will stay safe no matter what. It will also make it easy to fix the problem right away if you get an alert.
Some systems will alert you if the fridge door is open or closed. Others will give you information on the ambient lighting too. Small factors like these can make a big difference when keeping refrigerated products safe.
7. Avoid Compliance Problems
Many compliance guidelines need to be followed when keeping specific things refrigerated. Many regulatory powers have different compliance requirements. It can be hard to keep up with all these requirements.
If you don’t, you could get in trouble. Serious compliance violations may shut down your entire operation. This is unnecessary stress that no one wants to deal with, and you can avoid it with a remote monitoring system.
This is because most remote systems are already familiar with all the major compliance requirements. You can also specify other requirements to make the system aware of them. Such a system allows you to track your products no matter where they might be.
This also makes it easy to show that your products followed compliance regulations at every step. This will make it much easier to avoid any compliance issues.
8. Easy and Fast Accessibility
Old-fashioned temperature monitoring systems are not easily or quickly accessible. Older systems might require you to waste several minutes of your time to accomplish basic tasks. You might also get frustrated with the system’s complicated or confusing designs.
But you can avoid these problems with a remote monitoring system. This is because modern systems are far more accessible. They work faster than older systems and are easy to access no matter where you are.
You could be in another country and the remote power of the system would allow you to check up on it. This makes it easy to make sure the temperature levels are in the ideal range for your needs. You can also check other factors like humidity and CO2 levels while you’re out and about.
This makes it easy to make sure everything is on track no matter where you are.
9. Quality Assurance and Safety
Some products can easily get ruined if they aren’t kept in a stable environment. Some medications may become unsafe if they get too warm. Giving bad medication to a patient could make them sick and cause all sorts of problems.
This is why you need to prioritize quality assurance and safety for your products. You can accomplish this with a remote temperature monitoring system. These systems are far more detailed and advanced than old-fashioned ones.
This makes it easy to make sure your refrigerated products stay at a constant temperature. Controlling the temperature helps make sure that the products or samples will always remain at the ideal temperature. If the temperature changes too drastically, you will get an alert.
This helps avoid the problem of refrigerated products getting ruined. It also keeps your products and samples safe and ready for use in the future.
10. Consistency
A remote temperature monitoring system is the king of consistency. Old-fashioned monitoring systems make it difficult to keep the temperature consistent. You’d have to be available at all times to adjust the temperature if it shifts.
Your adjustments might not be consistent or accurate either. But remote systems are designed to be as consistent and accurate as possible. You can create settings that adjust the temperature and other factors in very precise ways.
This precision makes it easy to be consistent anywhere, anytime. Suppose you have a bacterial sample you’re trying to grow. It will never grow properly if the humidity and temperature levels fluctuate.
The sample might die or be stunted. But having a consistent environment will allow the sample to flourish. A remote monitoring system makes this easy too.
All you have to do is press a few buttons and make sure all the information is up to par.
11. Reduced Waste
You will end up with a lot of waste if you don’t keep your refrigerator constant. Fluctuating temperatures and other factors will ruin anything that you put inside the fridge.
Medications will get destroyed, bacterial samples will get ruined, and so on.
This is also a problem when refrigerating food. A fluctuating environment will require you to throw out whatever products you were trying to refrigerate. This will result in a large pile of waste.
Replacing that waste with new products will also cost you a lot of money. You can reduce waste by using a remote monitoring system. It will alert you if anything abnormal changes with the system.
This makes it easy to fix the problem and prevent waste. Your products will instead remain in good shape.
12. Easy to Use
Remote monitoring systems are designed to be very easy to use. You can access many of them from your phone or another digital device. The layout is straightforward.
You can easily navigate to the most important portions of the system to see how it’s doing. You can also look over important analytics and reports for a more historical perspective. There will be no need to get frustrated with any confusing controls and layouts.
Everything will be at your fingertips and very easy to understand.
13. Improved Accuracy
There is nothing more accurate than a remote temperature monitoring system. Many of its features are automated which makes it very easy to remain accurate. You can also double-check its information for accuracy.
Its accuracy helps ensure that all of its functions are high-quality and safe for your products.
All About Remote Temperature Monitoring System Options
A remote temperature monitoring system is essential for keeping your products safe. It has many benefits such as CO2, humidity, and temperature monitoring. It is also very accurate and easy to use.
It is a great thing to have if you want to save time, energy, and money. Your products and samples will be safe too. Contact us today to learn how the SensoScientific monitoring system can help your organization.